Double-shaft shredders

DRE series - hour capacity of 150-300 kg

DRE series - Our smallest manufactured low-speed shredders is DRE series. A material is shredded by segments mounted on two shafts, which slowly rotate against each other. The output from shredders are strips or pieces of waste whose size depends on the nature of the input material and the width of segments. Due to the fact that these are our smallest manufactured shredders, it is necessary to take into account small force parameters of it. In order to use DRE series effectively, material must be easy to be process mechanically. The capacity is about 150-300 kg/hour when material is loaded continuously and considering the sustainability of permanent shafts rotation.

Download document .pdf

DRN, DRK a DRT – hour capacity of 500-3000 kg

DRN and DRK series - Our middle class of low-speed shredders with one drive are DRN a DRK series. The principle of shredding is the material is cut at the edges of segments with extension rings stacked on shafts shredders. For nonadhesive, fragile and easily mechanically crushable materials may be placed a sieve below the working space to achieve a smaller and more homogenous output fractions. In general, the mesh size of the sieve cannot be smaller than the width of cutting segments. The capacity is about 500 - 1500 kg/hour.

Download document (DRN, DRK) .pdf

DRT - series - Our strongest manufactured low-speed shredders with one drive is DRT series. It is used for industrial preshredding waste materials for further processing (final shredding, combustion, transportation, etc.). Robustness, power parameters and reliability of DRT series represents fact that it is our best-selling series. The capacity is about 1500 - 2500 kg/hour.

 Download document (DRT) .pdf

DRD, DRW and DRU series - hour capacity of 3000 kg

DRD series - low-speed shredders with two drives (one for each shaft). They are designed for pre-shredding of large, bulky and tough materials with demand for a higher hourly capacity. These crushers are in most cases equipped with a hydraulic pressing device. The capacity is about 3000 - 5000 kg/hour.

Downaload document (DRD) pdf

DRW and DRU series - Our largest manufactured low-speed shredders with two drives, consist of two electric or hydraulic drives (-H) for each shaft. These shredders are designed as heavy-duty, to be able to process oversized waste materials. DRU are the largest stationary shredders made in the Czech Republic. They are equipped with a hydraulic pressing device for pushing bulky waste into the workspace. The capacity is from 5000, 10,000 and over kg/hour.

   Download document (DRW, DRU) .pdf